Reset Call; Speed Dialing - Panasonic DBS576 Section 700 Technical Manual

Feature operation
Hide thumbs Also See for DBS576 Section 700:
Table of Contents

Advertisement

Chapter 6. DSLT Features
Only one page may be performed at a time. If you attempt to make a page while another
extension is paging, you will receive a busy signal.

Reset Call

CPC-96, CPC-288, and CPC-576 All Versions
Description
If you dial a busy extension, the System allows you to quickly dial another extension by simply
pressing the last digit of the new extension number.
Operation
To use Reset Call to dial another extension (after a busy extension):
1. Lift the handset or press the ON/OFF key.
2. Dial an extension number.
3. Dial the last digit of the next extension number.
Example: You dial extension 213, but it is busy. To dial extension 214, enter 4.
Hardware Requirements
N/A
Related Programming
FF1-2: Dial Plan
Considerations
The second extension called using the Reset Call feature must have the same number of digits as
the first extension.
If you program the System for Reset Call, the following features are not available: Camp-on
(Ext. no. + 2), Callback Request (Ext. no. + 3), Message Waiting (Ext. no. + 4, Ext. no. + 5),
Intercom Busy Override (Ext. no. + 9).

Speed Dialing

CPC-96, CPC-288, and CPC-576 All Versions
Description
The System supports the following speed dial features:
Personal Speed Dial (PSD)
System Speed Dial (SSD)
254
Action
DBS 576 (USA), issued January 1999
Section 700 - Operation
Result
Intercom dial tone
Busy tone
576-20-700

Advertisement

Table of Contents
loading

Table of Contents