Set Send Text Messages - Panasonic DBS576 Section 700 Technical Manual

Chapter 4. User Maintenance
9. To set CID Log for additional extensions, press the volume
up and down key or press the HOLD key to move to the
desired Extension.
10. Repeat steps 6-8 until all extension are entered.
11. Press the AUTO key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A

Set Send Text Messages

Description
You can send a text message to a key telephone with a display when you are sending call waiting
signal (Auto camp-on or manual camp-on). This menu item specifies the text messages that may be
sent.
Operation
To set Send Text Messages using either a large-display or small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 11.
3. Press the HOLD key.
4. Enter 0.
5. Press the HOLD key.
6. Press the HOLD key.
112
Action
Action
DBS 576 (USA), issued January 1999
Section 700 - Operation
Result
81-
User MAINT displays
OR...
ON/OFF LED goes off
Result
81-
User MAINT displays
8111-
Text Message displays
0 :
Send Message displays
Enter Msg # displays
576-20-700