Download  Print this page

Set System Speed Dial Names - Panasonic DBS576 Section 700 Technical Manual

Feature operation.
Hide thumbs

Advertisement

Section 700 - Operation
7. Press the HOLD key.
8. Enter the SSD digits to be dialed.
Note: Press the FLASH key to clear an entry or any exist-
ing data.
9. Press the HOLD key to store the entry.
10. To set additional SSD numbers, press the volume up or
down key or press the HOLD key to move to the desired
SSD.
11. Repeat steps 8-10 until all SSDs are entered.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
N/A
Related Programming
N/A
Considerations
N/A

Set System Speed Dial Names

Description
For a description of System Speed Dial (SSD), see "System Speed Dial" on page 194 for a Digital
Key Telephone, "System Speed Dial" on page 256 for a Digital Single Line Telephone (DSLT), and
"System Speed Dial" on page 302 for a Single Line Telephone (SLT).
Operation
To set SSD names using either a large-display or small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 02.
576-20-700
Action
Action
DBS 576 (USA), issued January 1999
Chapter 4. User Maintenance
Result
-SSDXXX
XXX displays (where
XXX = SSD bin number)
Next SSD bin number displays
Desired SSD bin number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
Result
81-
User MAINT displays
87

Advertisement

Table of Contents

   Also See for Panasonic DBS576 Section 700

   Related Manuals for Panasonic DBS576 Section 700

Comments to this Manuals

Symbols: 0
Latest comments: