Set Message Key Id Code - Panasonic DBS576 Section 700 Technical Manual

Chapter 4. User Maintenance
5. Dial the extension number.
6. Press the HOLD key.
7. Enter the Call Forward ID code.
Notes: The ID code may contain up to 16 digits and contain
0, 1-9, *, #, pause (REDIAL key).
To clear an entry or any existing data, press the FLASH
key.
8. Press the HOLD key to store the entry.
9. To set additional Call Forward ID codes, press the volume
up or down key or press the HOLD key to move to the
desired extension.
10. Repeat steps 7-9 until all Call Forward ID codes are set.
11. Press the AUTO key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A

Set Message Key ID Code

Description
(For a description of the Message Key ID Code Feature, see "Message Key ID Code" on page 74.)
On a large display phone you can use a Message key to either retrieve voice mail messages or respond
to telephone messages. To respond to voice mail messages from a 3rd party voice mail system, you
need to set the Message Key ID code to identify the caller to the voice mail system. You can also use
the Message key to program a voice mail password.
94
Action
DBS 576 (USA), issued January 1999
Section 700 - Operation
Result
CF-ID EXT XXX displays (where
XXX = extension number)
Next extension number displays
Desired extension displays
CF ID-EXT Number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
576-20-700