Message Waiting / Callback - Panasonic DBS576 Section 700 Technical Manual

Chapter 5. Key Telephone Features
• If more than one callback message has been received, pressing the MSG key performs auto-
callback in the order received.
• The MSG key works only when the phone is idle or receiving internal dial tone.
• Auto-callback is always enabled for large display phones.
• Messages are accessed in a first-in, first-out order for Message Wait, except Priority Message
Wait, which is typically sent by Voice Mail.

Message Waiting / Callback

CPC-96, CPC-288, and CPC-576 All Versions
Description
If you try to call an extension that is busy or does not answer, you can leave a message wait indication
at that extension, requesting a return call.
Operation
To leave a message waiting indication:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. While the phone is still ringing, or when you hear the busy
tone, enter the Message Wait Set code (default = 4).
4. Replace the handset or press the ON/OFF key.
To answer a message waiting indication (callback):
1. Lift the handset or press the ON/OFF key.
2. Enter the Message Wait Callback code (default = *6) or
press the MSG key if using a large-display phone.
180
Action
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
Intercom dial tone
MSG Accepted displays
• Message lamp flashes at called exten-
sion
• MSG EXT XXX displays (where XXX
= calling extension number) or name
of calling extension displays at called
extension
Result
Intercom dial tone
• Telephone automatically dials exten-
sion that sent the message waiting indi-
cation
• Message lamp goes off when your call
is answered
576-13-700