Panasonic DBS576 Section 700 Technical Manual page 192

Chapter 5. Key Telephone Features
Operation
To assign PSD numbers:
1. Lift the handset or press the ON/OFF key.
2. (A) Press the PROG key.
(B) Press the AUTO key.
OR...
(A) Enter the Speed Dial Set/Clear code (default = 710).
3. Enter the PSD bin number (80-99).
4. Dial the phone number.
5. Press the HOLD key.
6. Replace the handset or press the ON/OFF key.
To dial a PSD number by entering the speed dial bin number:
1. Lift the handset or press the ON/OFF key.
2. If necessary, access an outside line.
3. Press the AUTO key.
OR...
Enter the Speed Dial Originate code (default = 80).
4. Enter the PSD bin number (80-99).
5. Complete the call and replace the handset or press the ON/
OFF key.
To check a PSD number:
1. Lift the handset or press the ON/OFF key.
2. Press the CONF key.
3. Press the AUTO key.
4. Enter the PSD bin number (80-99).
5. If you want to check the next PSD number, press the HOLD
key.
6. Replace the handset or press the ON/OFF key.
192
Action
Action
Action
DBS 576 (USA), issued January 1999
Section 700 - Operation
Result
Intercom dial tone
Enter Spd Dial displays
Stored Spd Dial displays
Result
Intercom dial tone
Outside dial tone
Result
Intercom dial tone
C displays
Programmed data displays
576-20-700