Section 700 - Operation
Offhook Signaling
CPC-96, CPC-288, and CPC-576 All Versions
Description
Offhook Signaling sends a tone to a busy extension to indicate that another CO call has arrived or a
call is camped on.
Operation
After receiving an offhook signal during a call:
1. Press the HOLD key.
2. Press the flashing FF key for the CO line of the incoming
call.
Note:
For details about handling multiple calls, see "Call Hold" on page 230.
Hardware Requirements
•
N/A
Related Programming
•
FF3: CO Off-Hook Signal.
Considerations
•
The CO call type may be either multiple ring, direct, or camp-on.
•
The system does not send the offhook signal under the following conditions:
• During a conference call
• During an OHVA or Busy override
• Data Privacy is enabled
• the receiving telephone is a 3rd party voice mail.
Offhook Voice Announce
CPC-96, CPC-288, and CPC-576 All Versions
Description
You can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook Voice
Announce (OHVA) feature to make an announcement that only the called party can hear. You can also
transfer a held call to a busy extension after making the announcement using this feature.
576-20-700
Action
DBS 576 (USA), issued January 1999
Chapter 6. DSLT Features
Result
251