Download  Print this page

Call Hold; System Hold - Panasonic DBS576 Section 700 Technical Manual

Feature operation.
Hide thumbs


Chapter 6. DSLT Features
FF1-0-03: Extension COS (Call Forward/Other)
FF1-2: Dial Plan
Calls cannot be forwarded to an extension that already has Call Forwarding DND activated.For
example, extension 220 can only forward to extension 225 if 225 is not forwarded.
If forwarding to an outside number, the destination number must be pre-programmed into a
System Speed Dial (SSD) code.
Call Forwarding - Busy and Call Forwarding - No Answer can both be set at the same time.
You can set Call Forwarding - All Calls while Call Forwarding - No Answer and/or Call
Forwarding - Busy are set. Canceling one mode only affects that mode; however, the other
modes will remain set until canceled individually.
An auto camp-on to a busy extension will forward to the Call Forward No Answer destination. A
manual camp-on to a busy extension will not forward.
If Call Forwarding No Answer and DND are both set, calls immediately forward to the Call
Forward No Answer destination.
You can cancel both Call Forwarding and DND by entering 7 * *.

Call Hold

CPC-96, CPC-288, and CPC-576 All Versions
The system provides the following types of Call Hold:

System Hold

Floating Hold
Exclusive Hold
Broker's Hold
Call Park (Station)
System Hold
You can place either an outside or intercom call on System Hold. You can retrieve a call placed on
System Hold from any extension that has a line appearance for the held call.
To place a call on System Hold:
1. While on a call, press the HOLD key.
DBS 576 (USA), issued January 1999
Section 700 - Operation
Intercom dial tone


Table of Contents

   Also See for Panasonic DBS576 Section 700

   Related Manuals for Panasonic DBS576 Section 700

Comments to this Manuals

Symbols: 0
Latest comments: