Set Call-Forward Id Codes For Voice Mail - Panasonic DBS576 Section 700 Technical Manual

Section 700 - Operation
12. To add additional Verified Account numbers, press the vol-
ume up or down key or press the HOLD key to move to the
desired Verified Account table number.
13. Repeat steps 8-12 until all Verified Account numbers are
entered.
14. Press the AUTO key to exit the entry mode
15. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A

Set Call-Forward ID Codes for Voice Mail

Description
(For a description of Call Forward ID codes for Voice Mail, see "Call Forward ID Code for Voice
Mail" on page 72.)
Voice Mail Call-Forward ID codes are used by voice mail systems to identify the correct mail box for
storing messages. The actual entry needed will vary by voice mail systems and configuration. Often
the entry is the extension number.
Operation
To set the Call Forward ID code:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 05.
3. Press the HOLD key.
4. Press the HOLD key.
576-20-700
Action
Action
DBS 576 (USA), issued January 1999
Chapter 4. User Maintenance
Result
Desired Verified Account table number
displays
Table Number
81-
User MAINT displays
OR...
ON/OFF LED goes off
Result
81-
User MAINT displays
8105-
C.FWD ID Code displays
CF ID-EXT Number displays
93