Download  Print this page

Direct Line Appearances - Panasonic DBS576 Section 700 Technical Manual

Feature operation.
Hide thumbs


Section 700 - Operation
To make an intercom call using the DSS/BLF key:
1. Press the flashing DSS/BLF key.
To pick up a call on a DSS/BLF key:
1. Go off-hook or press the flashing DSS/BLF key.
Hardware Requirements
Related Programming
FF1-0-02: BLF Call Pickup
FF4-0-04: FF Key Assignment
If several calls arrive at a DSS/BLF key, the calls are queued and ring on a first-in, first-out basis.
If a BLF key has a second call while busy and off- hook signaling is enabled, the BLF key starts
blinking. The call can be answered by pressing the BLF key or going on hook and then off hook.

Direct Line Appearances

CPC-96, CPC-288, and CPC-576 All Versions
Direct Line (DL) keys are used to originate and receive calls over specific trunk numbers (DL keys
can be assigned to any trunk number).
The LED for a DL key will flash red on an incoming call even if the CO line is set to ring. If another
extension answers the call, the LED on the telephone will light solid red.
To originate a trunk call...
To place a call on Exclusive Trunk Hold (page 133)...
To place a call on System Trunk Hold (page 133)...
To transfer a call...
Hardware Requirements
DBS 576 (USA), issued January 1999
Chapter 5. Key Telephone Features
1. Press an idle DL key.
2. The key blinks green as the call is made.
1. Press the DL key.
1. Press the HOLD key.
1. Press the HOLD key.
2. Dial the destination extension.
3. Press the PROG key.


Table of Contents

   Also See for Panasonic DBS576 Section 700

   Related Manuals for Panasonic DBS576 Section 700

Comments to this Manuals

Symbols: 0
Latest comments: