Chapter 4. User Maintenance
Set Special Day Mode
Description
(For a description of Automatic Day/Night System Mode, see "Automatic Day/Night Mode" on page
42.)
You can specify up to 20 special days for the System. For each special day, you can specify up to 5
modes settings.
Operation
To set the Special Day Modes:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 07.
3. Press the HOLD key.
4. Enter 1.
5. Press the HOLD key.
6. Press the HOLD key.
7. Enter the date by month (two characters) and day (two char-
acters) for the Special Day 1.
Note: To clear an entry or existing data, press the FLASH
key.
8. Press the HOLD key.
9. Enter the start time in hours (two characters) and minutes
(two characters) for mode 1.
Note: To clear an entry or existing data, press the FLASH
key.
10. Press the HOLD key.
11. Enter the desired mode for Special Day ( (0 - None, 1 -
Day 1, 2 - Day 2, 3 - Night, 4 - Night(1), 5 - Night (2)).
Note: To clear an entry or existing data, press the FLASH
key.
12. Press the HOLD key.
13. To set additional Special Day modes, press the volume up
or down key or press the HOLD key to move to the desired
mode.
98
Action
DBS 576 (USA), issued January 1999
Section 700 - Operation
Result
81-
User MAINT displays
8107-
System Mode displays
1-
Mode Special Day displays
1000
:MMDD
Special Day 01 displays
1001
:HHMM
S Day 01-1 Start displays
1002
:
S Day 01-1 Mode displays
Next Special Day mode displays
576-20-700