Download  Print this page

Intercom Calling - Panasonic DBS576 Section 700 Technical Manual

Feature operation.
Hide thumbs

Advertisement

Section 700 - Operation
Operation
To immediately connect to a pre-assigned extension or speed dial number:
1. Lift the handset or press the ON/OFF key.
Hardware Requirements
N/A
Related Programming
FF5-5: Hot Line
Considerations
N/A

Intercom Calling

CPC-96, CPC-288, and CPC-576 All Versions
Description
The System provides two methods of intercom calling:
Voice Calling: Extension calls are connected immediately, without a ringing tone.
Tone Calling: A ringing tone is sent to the called extension.
Extension Class of Service (COS) programming determines whether the default for the originating
extension is voice or tone calling. Regardless of the default, you can toggle between voice or tone
calling by entering the Tone-Voice Call feature code. For example, if the extension default is tone
calling, you can make a voice call to another extension by entering the Tone-Voice Call feature access
code.
Operation
To make a call using Intercom Calling:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. If your extension is set for tone calling and you want to
make a voice call, enter 1.
Or, if your extension is set for voice call and you want to
make a tone call, enter 1.
576-20-700
Action
Action
DBS 576 (USA), issued January 1999
Chapter 6. DSLT Features
Result
Automatically connected to pre-assigned
extension or speed dial number
Result
Intercom dial tone
247

Advertisement

Table of Contents

   Also See for Panasonic DBS576 Section 700

   Related Manuals for Panasonic DBS576 Section 700

Comments to this Manuals

Symbols: 0
Latest comments: