Download  Print this page

Hardware Requirements - Panasonic DBS576 Section 700 Technical Manual

Feature operation.
Hide thumbs

Advertisement

Section 700 - Operation
Operation
To set PSD numbers:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 01.
3. Press the HOLD key.
4. Press the HOLD key.
5. Press the HOLD key.
6. Dial the extension number.
7. Press the HOLD key.
8. Enter the PSD bin number (80-99).
9. Press the HOLD key.
10. Enter the PSD digits to be dialed.
Note: To clear an entry or existing data, press the FLASH
key.
11. Press the HOLD key to store the entry.
12. To set additional PSD numbers, press the volume up and
down key or press the HOLD key to move to the desired
PSD bin number.
13. Repeat steps 10-12 until all PSD numbers are entered.
14. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.

Hardware Requirements

N/A
Related Programming
N/A
Considerations
N/A
576-20-700
Action
DBS 576 (USA), issued January 1999
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8101-
PSD Assignment displays
0
:
PSD Number displays
EXT Number displays
Enter PSD # XXX displays (where
XXX = dialed extension number)
YYY
ZZ displays (where XXX
= extension number, YYY = assigned
name, and ZZ = PSD bin number)
Next PSD bin number displays
Desired PSD bin number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
81

Advertisement

Table of Contents

   Also See for Panasonic DBS576 Section 700

   Related Manuals for Panasonic DBS576 Section 700

Comments to this Manuals

Symbols: 0
Latest comments: