Download  Print this page

Auto Repeat Dial - Panasonic DBS576 Section 700 Technical Manual

Feature operation.
Hide thumbs

Advertisement

Chapter 6. DSLT Features
Operation
To call an attendant group:
1. Lift the handset or press the ON/OFF key.
2. Enter the attendant pilot number (default = 0).
Hardware Requirements
N/A
Related Programming
FF1-2: Dial Plan
FF3-0: Extension Number
FF5-0: Attendant Hunt Groups
Considerations
Up to 20 extensions can be included in an attendant group.
The attendant pilot number is flexible.
If a member of an attendant group is for a virtual extension, multiple extensions in the attendant
group can be made to ring at once when the virtual number is dialed.
Attendant calls are always tone calls (i.e., not voice calls).

Auto Repeat Dial

CPC-96, CPC-288, and CPC-576 All Versions
Description
If you press the REDIAL key while receiving busy tone on an outside call, the System automatically
redials the number. The System continues to redial the number at set intervals until the called number
answers, the caller hangs up, or the maximum of 15 redial attempts is made.
Operation
To use Auto Repeat Dial:
1. Press the ON/OFF key.
2. Enter a trunk access code.
3. Dial the phone number.
4. Press the REDIAL key.
222
Action
Action
DBS 576 (USA), issued January 1999
Section 700 - Operation
Result
Intercom dial tone
Result
Intercom dial tone
Busy tone
System automatically redials number
576-20-700

Advertisement

Table of Contents

   Also See for Panasonic DBS576 Section 700

   Related Manuals for Panasonic DBS576 Section 700

Comments to this Manuals

Symbols: 0
Latest comments: