Download  Print this page

Manual Day/night Mode - Panasonic DBS576 Section 700 Technical Manual

Feature operation.
Hide thumbs

Advertisement

Chapter 3. System Features
Table 7.
System Mode Impact on TRS, Ringing, Attendant, and Built-in Voice Processing Unit
SYSTEM
MODE
Day 1
Day TRS Mode
Day 2
Day TRS Mode
(Same for Day 1 and
Day 2)
Night
Night TRS Mode
(Same for Night 1,
and 2)
Night 1
Night TRS Mode
(Same for Night 1,
and 2)
Night 2
Night TRS Mode
(Same for Night 1,
and 2)

Manual Day/Night Mode

You can manually change the System mode to Day 1, Day 2, Night, Night 2, or Night 3 mode by
either entering the correct dial code or by pressing the appropriately programmed FF key.
When using manual mode, the System may be configured to either use MCO tenant Day/Night modes
or system-wide Day/Night mode.
Operation
To switch Day/Day 2/Night modes using Feature Access Codes (CPC Ver. prior to 2.0):
Switch Mode
Toggle Day 1,
Day 2, and Night
Modes
Day 2 Mode
40
TRS
RING
Day 1 Ring Pattern
Day 2 Ring Pattern
Night Ring Pattern
(Same for Night 1,
and 2)
Night Ring Pattern
(Same for Night 1,
and 2)
Night Ring Pattern
(Same for Night 1,
and 2)
Procedure
1. Press the ON/OFF key.
2. Enter 760.
3. Press the ON/OFF key
1. Press the ON/OFF key.
2. Enter 761 for the Day 2 Feature
code.
3. Press the ON/OFF key
DBS 576 (USA), issued January 1999
Section 700 - Operation
ATTENDANT
Day 1 Attend. Group
Day 2 Attend. Group
Handling
Night Attend. Group
(Same for Night 1,
and 2)
Night Attend. Group
(Same for Night 1,
and 2)
Night Attend. Group
(Same for Night 1,
and 2)
Indication
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
If changing to Night mode, Red LED lights
If changing to Day mode, Red LED goes off
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
Green LED lights
BUILT-IN
VOICE
PROCESSING
UNIT
Day 1 Message
Day 2 Message
Night Message
Night 1 Message
Night 2 Message
576-20-700

Advertisement

Table of Contents

   Also See for Panasonic DBS576 Section 700

   Related Manuals for Panasonic DBS576 Section 700

Comments to this Manuals

Symbols: 0
Latest comments: