Panasonic DBS576 Section 700 Technical Manual page 187

Section 700 - Operation
6. Press the HOLD key.
7. Replace the handset or press the ON/OFF key.
To chain 2 to 6 SSD numbers to a single one-touch key:
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. Press the AUTO key.
5. Enter the SSD bin number that contains the first part of the
number to be dialed.
6. If a pause is required, press the REDIAL key
7. Repeat steps 4-5 (up to 5 more times) for each additional
speed dial number to be chained.
8. Press the HOLD key.
9. Replace the handset or press the ON/OFF key.
To assign a feature code or extension number to a one-touch key:
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. If the System is set for MCO Code level, press the following
keys AUTO * #. Otherwise, proceed to step 5.
5. Enter the desired feature code or extension number.
6. Press the HOLD key.
7. Replace the handset or press the ON/OFF key.
To check a programmed one-touch key:
1. Lift the handset or press the ON/OFF key.
2. Press the CONF key.
576-20-700
Action
Action
Action
Action
DBS 576 (USA), issued January 1999
Chapter 5. Key Telephone Features
Result
Result
Intercom dial tone
• Pause occurs between access code and
telephone number
• R displays
Result
Intercom dial tone
Result
Intercom dial tone
C displays
187