Download  Print this page

Trunk Access; Co Line Key Trunk Access; Direct Trunk Access - Panasonic DBS576 Section 700 Technical Manual

Feature operation.
Hide thumbs

Advertisement

Section 700 - Operation
Considerations
An alarm tone (default = 16 seconds) will be issued at the specified time.
An extension can have only one Reminder Call set at a time.
To change the Reminder Call, simply enter a new time.
If the extension is in use when the reminder call is scheduled, the reminder call is issued 3
minutes later.

Trunk Access

CPC-96, CPC-288, and CPC-576 All Versions
Description
The System supports the following ways to seize an idle trunk to make an outside code:
CO Line Trunk Access

Direct Trunk Access

MCO Line Preference
MCO Trunk Access

CO Line Key Trunk Access

You can access an outside line by pressing a CO line key.
Operation
To access an outside line:
1. Press a vacant CO key.
2. Dial the phone number
Hardware Requirements
N/A
Related Programming
FF4: FF Key Assignment
Considerations
N/A
Direct Trunk Access
Extensions can seize a specific trunk for outgoing calls. Extensions can also use Direct Trunk Access
to test trunks or to access data trunks.
576-20-700
Action
DBS 576 (USA), issued January 1999
Chapter 5. Key Telephone Features
Result
• Outside dial tone
• CO XXX displays (where XXX = line
number)
Dialed phone number displays
205

Advertisement

Table of Contents

   Also See for Panasonic DBS576 Section 700

   Related Manuals for Panasonic DBS576 Section 700

Comments to this Manuals

Symbols: 0
Latest comments: