Set Absence Messages - Panasonic DBS576 Section 700 Technical Manual

Section 700 - Operation
13. To set additional text Messages, press the volume up or
down key or press the HOLD key to move to the desired
Send Text Message.
14. Repeat steps 9-13 until all Text Message Replies are
entered.
15. Press the AUTO key to exit the entry mode.
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A

Set Absence Messages

Description
This menu item specifies absences messages.
Operation
To set Absence Messages using either a large-display or small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 12.
3. Press the HOLD key.
4. Press the HOLD key.
5. Enter the Message number (0-9).
6. Press the HOLD key.
576-20-700
Action
Action
DBS 576 (USA), issued January 1999
Chapter 4. User Maintenance
Result
Desired text message displays
Enter Msg # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
Result
81-
User MAINT displays
8112-
Absence Message displays
Enter Msg # displays
A B C D E F X
displays (where X = Absence Message
number)
115