Panasonic DBS576 Section 700 Technical Manual page 54

Chapter 3. System Features
Operation
To set extension names using a large-display or small-display phone:
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the * key.
4. Enter 2 for the Extension Name Assignment mode.
5. Enter the extension number.
6. Press the HOLD key.
7. Press the FLASH key to clear the existing data.
8. Enter the extension name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
55.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 56.)
9. Use the bottom row of FF keys to select a single letter.
• See "Example 1. Large-display phone" on page 55.
• See "Example 2. Small-display phone" on page 56.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
10. Repeat steps 7-8 as many times as necessary to enter the
desired extension name.
Note: Press the FLASH key to clear the entire entry.
11. Press the HOLD key when finished.
12. To enter another extension name, press the CONF key and
repeat steps 5-11.
54
Action
DBS 576 (USA), issued January 1999
Section 700 - Operation
Result
Intercom dial tone
EXT NO.=>
displays
EXT NAME
XXX
displays (where
A B C D E F XXX
XXX = extension number)
A B C D E F XXX displays (where
XXX = extension number)
Next extension number displays
EXT NO.=>
EXT NAME displays
576-20-700