Section 700 - Operation
To manually link speed dials together:
1. Lift the handset or press the ON/OFF key.
2. If necessary, access an outside line.
3. Press the AUTO key, then enter the PSD or SSD bin num-
ber.
4. Press the AUTO key and enter the PSD or SSD codes to
dial the parts of the phone number until it is completed.
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
•
N/A
Station Lockout
CPC-96, CPC-288, and CPC-576 Version 2.0
Description
Use the Station Lockout feature to limit use of your phone by others when you are away from your
telephone. When the Station Lockout feature is in use, the TRS Class of your telephone is changed.
Anyone using your telephone is limited to the calling abilities defined by this Lockout TRS Class.
In addition, with the appropriate COS, you can set or cancel Station Lockout for other telephones.
To activate Station Lockout feature:
1. Lift the handset.
2. Enter the Station Lockout feature code (default = 746).
3. Replace the handset.
To cancel Station Lockout feature:
1. Lift the handset.
2. Enter the Station Lockout feature code (default = 746).
576-20-700
Action
Action
Action
DBS 576 (USA), issued January 1999
Chapter 6. DSLT Features
Result
Intercom dial tone
Outside dial tone
Result
Intercom dial tone
Result
Intercom dial tone
259