Busy Lamp Field Ringing; Busy Lamp Field Delayed Ringing; Slide Ringing - Panasonic DBS576 Section 700 Technical Manual

Section 700 - Operation
Considerations
• Call Forwarding takes priority over DID Busy/Delayed Ringing
• If the call is part of a hunt group and the Queuing Timer expires, the call is forwarded to the DID
Busy/Delay Ringing destination. (See "DID Day/Night Busy/Delayed Ringing" on page 64.)

Busy Lamp Field Ringing

Extensions that have Direct Station Select (DSS)/BLF FF keys assigned may be set to ring on those
keys.
Hardware Requirements
• N/A
Related Programming
• FF4: FF Key Assignment
Considerations
• ISDN phones may not set BLF ringing.
• For more information on BLF ringing, see "Line Appearances" on page 175.

Busy Lamp Field Delayed Ringing

Extensions that have Direct Station Select (DSS)/BLF FF keys assigned may be set to delay ring on
those keys.
Hardware Requirements
• N/A
Related Programming
• FF4: FF Key Assignments
Considerations
• ISDN phones may not set BLF ringing.
• For more information on BLF ringing, see "Line Appearances" on page 175.

Slide Ringing

CPC-96, CPC-288, and CPC-576 All Versions
Similar to Delayed Ringing, Slide Ringing allows an alternate position to answer calls. If a call is not
answered within a slide ringing time period, the call can be set to ring at another phone with that trunk
key.
One possible use for Slide Ringing is in an office with a common secretary. A non-ringing FF key can
be assigned for each CO trunk used by the group. If a call is not answered within the slide ringing
timer, the call will ring the common secretary.
Hardware Requirements
• N/A
576-20-700 DBS 576 (USA), issued January 1999
Chapter 3. System Features
65