Set Verified Account Codes - Panasonic S-ICX Technical Manual

Section 700 - Operation
10. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-Display Phone on page 91.
• See Example 2. Small-Display Phone on page 92.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
11. Repeat steps 9-10 as many times as necessary to enter the
desired Text Message.
Note: Press the FL/R key to clear the entire entry.
12. Press the HOLD key to store the entry.
13. To set additional text Messages, press the volume up or
down key or press the HOLD key to move to the desired
Send Text Message.
14. Repeat steps 9-13 until all Text Message Replies are
entered.
15. Press the MEMORY key to exit the entry mode.
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Considerations
• N/A

Set Verified Account Codes

Description
(For a description of Verified Account Codes, see "Verified Account Codes" on page 119.)
You can enter up to 500 Verified Account codes. The System will store them in memory as valid
codes. Once the codes are entered here, a Toll Restriction Service (TRS) (Call Barring) Class of
Service (COS) can be used with each code. You can then enter your code on someone else's phone to
bypass the TRS (Call Barring) restrictions on that phone. (The TRS (Call Barring) assigned to the
Verified Account code will override the phone's TRS.)
Operation
S-ICX-50-700
Action
S-ICX (International) issued October 2000
Chapter 4. User Maintenance
Result
Next message number displays
Desired Text Message displays
Enter Msg # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
109