Chapter 3. System Features
•
Network paging
•
Network call routing
•
Tandem calling
For more information on System Networking, see the System Networking Reference Manual.
Network Call Transfer
Network Call Transfer allows a call at an extension to be transferred to another extension in the
network.
Network Centralized Attendant
CPC-96, CPC-288, and CPC-576 Version 2.1
Network Centralized Attendant allows one primary attendant group in the network to handle network
attendant calls.
Network Centralized Voice Mail
CPC-96, CPC-288, and CPC-576 Version 2.1
Network Centralized Voice Mail allows one primary voice mail system to support the network.
Network Extension Calling
Network Extension Calling allows you to reach an extension on another PBX. Based on the number
you dial, the System network routes the call automatically.
Network Paging
Network Paging allows users on one System to page on another System when the appropriate Class of
Service (COS) allows.
Network Call Routing
Network Call Routing allows multiple systems that are interconnected in a network, to direct calls to a
specific tie line based on the number dialed. The call does not leave the network.
Tandem Connection
Tandem Connection allows calls that are received over the network tie lines to be automatically routed
on to another PBX or out to the public network.
Hardware Requirements
•
T1 or E&M Card
Related Programming
•
FF6: ARS/TRS
Considerations
•
N/A
60
DBS 576 (USA), issued January 1999
Section 700 - Operation
576-20-700