Panasonic DBS576 Section 700 Technical Manual page 193

Section 700 - Operation
To delete a PSD number:
1. Lift the handset or press the ON/OFF key.
2. (A) Press the PROG key.
(B) Press the AUTO key.
OR...
(A) Enter the Speed Dial Set/Clear code (default = 710).
3. Enter the PSD bin number (80-99).
4. Press the HOLD key.
5. Replace the handset or press the ON/OFF key.
Hardware Requirements
• N/A
Related Programming
• FF8-1: PSD Numbers
• FF8-1: PSD Names
Considerations
• PSD number can be dialed from One-Touch keys. (For additional information, see "One-Touch
Keys" on page 186.)
• Storing a new number erases any previously stored data.
• If the called party's number and name are stored in the PSD code, that information appears on the
display when you use the speed dial code.
• Speed dial numbers can contain up to 24 characters. The following table reflects which keys to
use.
To indicate. . .
Digit or character
Intercom Level *
MCO Code **
Pause
DP - DTMF Code
SSD Code
Hyphen (-)
Display Number (Start / Stop) ***
DTMF Conversion After the
Other Party Answers
576-20-700
Action
Enter/Press
0, 1 - 9, *, #
AUTO * #
AUTO * 0
REDIAL
AUTO * *
AUTO
NN(N)
PROG
AUTO * 2
AUTO * 3
(Version 2.1
or higher)
DBS 576 (USA), issued January 1999
Chapter 5. Key Telephone Features
Result
Intercom dial tone
Cleared Spd Dial displays
Shown on Display?
yes (unless preceded by AUTO * 2 - see ***
below)
no
no
no
no
no
yes
193