Download  Print this page

Dp To Dtmf Signal Conversion - Panasonic DBS576 Section 700 Technical Manual

Feature operation.
Hide thumbs

Advertisement

Section 700 - Operation
To cancel DND for another extension:
1. Lift the handset or press the ON/OFF key.
2. Enter the DND Cancel by Other Phone code (default = 750).
3. Dial the extension number.
4. Replace the handset or press the ON/OFF key.
Hardware Requirements
N/A
Related Programming
FF1-0-03: Extension COS (Manual DND Override Send)
FF1-0-03: Extension COS (Forced DND Override)
FF1-0-03: Extension COS (DND Set/Clear)
FF1-0-03: Extension COS (DND Set/Clear Other)
FF1-2: Dial Plan
FF3: Extension COS
Considerations
Forced DND override is available.
DND override function is available by Busy Override code.

DP to DTMF Signal Conversion

CPC-96, CPC-288, and CPC-576 All Versions
Description
Dial Pulse (DP) to Dual Tone Multifrequency (DTMF) Signal Conversion allows you to switch from
DP to DTMF signaling when using a DP trunk. For instance, if you dial into a Voice Mail system
using a DP trunk, you can switch to DTMF signaling to communicate with the Voice Mail system.
(The System can automatically change DP to DTMF tones based on the incoming and outgoing
timers).
Operation
To switch from DP to DTMF dialing:
1. Press the * key or the # key.
576-20-700
Action
Action
DBS 576 (USA), issued January 1999
Chapter 6. DSLT Features
Result
Intercom dial tone
Result
245

Advertisement

Table of Contents

   Also See for Panasonic DBS576 Section 700

   Related Manuals for Panasonic DBS576 Section 700

Comments to this Manuals

Symbols: 0
Latest comments: