Download  Print this page

Callback Request - Panasonic DBS576 Section 700 Technical Manual

Feature operation.
Hide thumbs

Advertisement

Section 700 - Operation
Considerations
You cannot break in on three-party conference calls.
The default for the Override Alert Tone is off. If the Override Alert Tone is enabled, the tone will
be sent to both parties when a call is overridden.

Callback Request

CPC-96, CPC-288, and CPC-576 All Versions
Description
If you dial a busy extension, Callback Request enables the System to call you back when that
extension becomes free. When you answer, the System automatically rings the called party again.
Operation
To set a Callback Request:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. Enter the Callback Request code (default = 3).
4. Replace the handset after you hear the ringback tone.
To respond to the callback request:
1. Lift the handset.
To cancel a Callback Request (Version 2.0 and higher):
1. Lift the handset.
2. Enter the Callback cancellation code (default = 769).
3. Replace the handset .
Hardware Requirements
N/A
576-20-700
Action
Action
Action
DBS 576 (USA), issued January 1999
Chapter 6. DSLT Features
Result
Intercom dial tone
Busy tone
Ringback tone
System calls back when called extension
becomes free
Result
System automatically redials extension
Result
Intercom dial tone
225

Advertisement

Table of Contents

   Also See for Panasonic DBS576 Section 700

   Related Manuals for Panasonic DBS576 Section 700

Comments to this Manuals

Symbols: 0
Latest comments: