Download  Print this page

Set Walking Trs Codes - Panasonic DBS576 Section 700 Technical Manual

Feature operation.
Hide thumbs

Advertisement

Chapter 4. User Maintenance
Hardware Requirements
N/A
Related Programming
N/A
Considerations
N/A

Set Walking TRS Codes

Description
You can assign Walking TRS Codes for each extension.
Operation
To set Walking TRS Codes using either a large-display or small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 08.
3. Press the HOLD key.
4. Press the HOLD key.
5. Dial the extension number.
6. Press the HOLD key.
7. Enter the 4-digit Walking TRS Code.
8. Press the HOLD key to store the entry.
9. To set additional extension Walking TRS Codes, press the
volume up and down key or press the HOLD key to move
to the desired Extension.
10. Repeat steps 8-10 until all extension are entered.
11. Press the AUTO key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
108
Action
DBS 576 (USA), issued January 1999
Section 700 - Operation
Result
81-
User MAINT displays
8108-
Walking TRS Cod displays
Walking ID-Ext displays
Walking ID XXX displays
Next extension number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
576-20-700

Advertisement

Table of Contents

   Also See for Panasonic DBS576 Section 700

   Related Manuals for Panasonic DBS576 Section 700

Comments to this Manuals

Symbols: 0
Latest comments: