Set Mode Schedule - Panasonic DBS576 Section 700 Technical Manual

Chapter 4. User Maintenance

Set Mode Schedule

Description
(For a description of Automatic Day/Night System Mode, see "Automatic Day/Night Mode" on page
42.)
You can set the System to automatically enter None, Day 1, Day 2, Night, Night (1), or Night (2)
modes based upon mode patterns. You can define up to 3 patterns with up to 5 modes for each day.
(This menu allows the setting of the patterns.)
Operation
To set the Mode Schedule:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 07.
3. Press the HOLD key.
4. Press the HOLD key.
5. Press the HOLD key.
6. Enter the start time in hours (two characters) and minutes
(two characters) for the Pattern 1 - first mode.
Note: To clear an entry or existing data, press the FLASH
key.
7. Press the HOLD key.
8. Enter the desired mode for Pattern 1 - first (0 - None, 1 -
Day 1, 2 - Day 2, 3 - Night, 4 - Night (1), 5 - Night (2)).
Note: To clear an entry or existing data, press the FLASH
key.
9. Press the HOLD key to store the entry.
10. To set additional mode schedules, press the volume up or
down key or press the HOLD key to move to the desired
mode.
11. Repeat steps 6-10 until all patterns and modes are set.
(There are 3 total patterns with 5 start time/modes each.)
Note: Entry Positions are listed in Table 10 on page 97.
96
Action
DBS 576 (USA), issued January 1999
Section 700 - Operation
Result
81-
User MAINT displays
8107-
System Mode displays
0-
Mode Schedule displays
000 :HHMM
PTN 1-1 Start T displays
001 :
PTN 1-1 Mode displays
Next pattern mode displays
Desired pattern mode displays
576-20-700