Download  Print this page

Panasonic DBS576 Section 700 Technical Manual Page 166

Feature operation.
Hide thumbs

Advertisement

Chapter 5. Key Telephone Features
Considerations
If a new code is programmed into a key, the previously programmed code is erased.
FF keys assigned as CO lines must be cleared using system programming before new FF
assignments can be made.
The System can be programmed so that MCO 1 Trunk Access calls automatically use Automatic
Route Selection (ARS).
The ANSWER key functions as listed in the table below.
Status
Idle
Off-Hook
Note: When the extension has 1 non-appearing CO on hold and 1 non-appearing CO at talk,
ANSWER key operation is ignored and you can't put the 2nd non-appearing CO on hold.
The RELEASE key functions as listed in the table below.
Status
Idle
Monitor ON
(speaker) or Headset
Mode
Handset Off-Hook
Table 18. Feature access codes for FF key assignments
Feature Description
CO Trunk Key
MCO Key
Virtual Port Key
BLF/DSS Outgoing
BLF/DSS Immediate Ring
BLF Delayed Ring
166
Condition
No incoming ring
Incoming ring
Off-hook signaling
No off-hook signaling
Condition
--
Several held calls
No held calls
Several held calls
No held calls
Fixed Feature Code
+ (additional digits to program into
key)
# + (Trunk 1-576)
1 + (Auto-Select Pattern 1-5;
MCO-Incoming Trk Grp 00-99)
∗9 + (Virtual Port 001-576)
9 + (Extension 0-9999)
81 + (Extension 0-9999)
82 + (Extension 0-9999)
DBS 576 (USA), issued January 1999
Operation when ANSWER key is pressed
Ignore.
Monitor ON (speaker) - Auto Answer for incom-
ing ring.
Answer for off-hook signaling. Current conver-
sation will be put on hold automatically.
Ignore.
Operation when RELEASE key is pressed
Ignore.
Latest held call will be transferred; phone returns
to idle status (Monitor OFF).
Current call (talk) will be released; phone returns
to idle status (Monitor OFF).
Latest held call will be transferred; phone gets
internal dial tone.
Current call (talk) will be released; phone gets
internal dial tone.
Default Flexible
Feature Code
(if not listed, must use
Fixed Feature Code)
Section 700 - Operation
576-20-700

Advertisement

Table of Contents

   Also See for Panasonic DBS576 Section 700

   Related Manuals for Panasonic DBS576 Section 700

Comments to this Manuals

Symbols: 0
Latest comments: