Manual Day/Night Mode - Panasonic 524X07801B Technical Manual

Chapter 3. System Features
Table 6. System Mode Impact on TRS, Ringing, Attendant, and Built-in Voice Processing Unit
SYSTEM
MODE
Day 1 Day TRS Mode
Day 2 Day TRS Mode
(Same for Day 1 and
Day 2)
Night Night TRS Mode
(Same for Night 1,
and 2)
Night 1 Night TRS Mode
(Same for Night 1,
and 2)
Night 2 Night TRS Mode
(Same for Night 1,
and 2)

Manual Day/Night Mode

You can manually change the System mode to Day 1, Day 2, Night, Night 2, or Night 3 mode by
either entering the correct dial code or by pressing the appropriately programmed FF key.
When using manual mode, the System may be configured to either use MCO tenant Day/Night modes
or system-wide Day/Night mode.
Operation
To switch Day/Day 2/Night modes using Feature Access Codes:
Switch Mode
Toggle Day and
1. Press the ON/OFF key.
Night Modes
2. Enter 760.
3. Press the ON/OFF key
Day 2 Mode
1. Press the ON/OFF key.
2. Enter 761 for the Day 2 Feature
3. Press the ON/OFF key
38
TRS RING
Day 1 Ring Pattern
Day 2 Ring Pattern
Night Ring Pattern
(Same for Night 1,
and 2)
Night Ring Pattern
(Same for Night 1,
and 2)
Night Ring Pattern
(Same for Night 1,
and 2)
Procedure
code.
DBS 576 (USA), Revised 6/11/98
ATTENDANT
Day 1 Attend. Group
Day 2 Attend. Group
Handling
Night Attend. Group
(Same for Night 1,
and 2)
Night Attend. Group
(Same for Night 1,
and 2)
Night Attend. Group
(Same for Night 1,
and 2)
Indication
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
If changing to Night mode, Red LED lights
If changing to Day mode, Red LED goes off
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
Red LED goes off
Section 700 - Operation
BUILT-IN
VOICE
PROCESSING
UNIT
Day 1 Message
Day 2 Message
Night Message
Night 1 Message
Night 2 Message
576-13-700