Table of Contents
Advertisement
Programming
*15 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to "A" if telephone line condition is not good.
*16 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*17 This menu icon is displayed when the key detector is not registered.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 5 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit's date and time setting
is correct (page 11).
1
MMenuN (right soft key) #720
2
Select an alarm by pressing 1 to 5. a
MSelectN
3
MbN: Select the desired alarm option. a
MSelectN
"Off"
Turns alarm off. Go to step 10.
"Once"
An alarm sounds once at the set time.
"Daily"
An alarm sounds daily at the set time.
Go to step 5.
"Weekly"
Alarm sounds weekly at the set time(s).
4
Proceed with the operation according to
your selection in step 3.
n Once:
Enter the desired month and date. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press MSelectN. a MOKN
26
PRS120C(en)_0121_ver110.pdf
5
6
7
8
9
10
Note:
R Press MStopN to stop the alarm completely.
R When the handset is in use, the alarm will
R Press any dial key or MSnoozeN to stop the
R If you want to make an outside call when
Night mode
Night mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set for each handset.
Using the phonebook's group feature
(page 17), you can also select groups of
callers whose calls override night mode and
ring the handset (Call Display subscribers
only).
26
Set the desired time.
*: Select "AM" or "PM". a MOKN
Enter a text memo (30 characters max.).
a MOKN
MbN: Select the desired alarm tone. a
MSelectN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
MbN: Select the desired snooze setting.
a MSelectN
MSelectN a MOFFN
not sound until the handset is in standby
mode.
sound but keep the snooze function
activated.
the snooze function is activated, please
stop the snooze function before making the
call.
2014/01/29
14:56:58
Advertisement
Table of Contents
