Manual Day/Night Mode - Panasonic S-ics Technical Manual

Chapter 3. System Features
SYSTEM
TRS (Call Barring)
MODE
Night Night TRS Mode
(Same for Night 1,
and 2)
Night 1 Night TRS Mode
(Same for Night 1,
and 2)
Night 2 Night TRS Mode
(Same for Night 1,
and 2)

Manual Day/Night Mode

You can manually change the System mode to Day 1, Day 2, Night, Night 2, or Night 3 mode by
either entering the correct dial code or by pressing the appropriately programmed FF key.
When using manual mode, the System may be configured to either use MCO tenant Day/Night modes
or system-wide Day/Night mode.
Operation
To switch Day 1/Day 2/Night modes using Feature Access Codes:
Switch Mode
Toggle Day 1,
1. Press the ON/OFF key.
Day 2 and Night
Modes
2. Enter 760 (UK/HK) or 760#.
3. Press the ON/OFF key
Day 2 Mode
1. Press the ON/OFF key.
2. Enter 761 (UK/HK) or 761# for
the Day 2 Feature code.
3. Press the ON/OFF key
Night 1 Mode
1. Press the ON/OFF key.
2. Enter 762 (UK/HK) or 762# for
the Night 1 Feature code.
3. Press the ON/OFF key
36
RING
Night Ring Pattern
(Same for Night 1,
and 2)
Night Ring Pattern
(Same for Night 1,
and 2)
Night Ring Pattern
(Same for Night 1,
and 2)
Procedure
S-ICX (International) issued April 2002
ATTENDANT
Night Attend. Group
(Same for Night 1,
and 2)
Night Attend. Group
(Same for Night 1,
and 2)
Night Attend. Group
(Same for Night 1,
and 2)
Indication
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
If changing to Night mode, Red LED lights
If changing to Day mode, Red LED goes off
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
Green LED lights
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
Red Night LED lights
Section 700 - Operation
BUILT-IN
VOICE MAIL
Night Message
Night 1 Message
Night 2 Message
S-ICX-64-700