Manual Day/Night Mode - Panasonic DBS-576HD Technical Manual

Section 700 - Operation
SYSTEM
MODE
Night 1 Night TRS Mode
(Same for Night 1,
and 2)
Night 2 Night TRS Mode
(Same for Night 1,
and 2)

Manual Day/Night Mode

You can manually change the System mode to Day 1, Day 2, Night, Night 2, or Night 3 mode by
either entering the correct dial code or by pressing the appropriately programmed FF key.
When using manual mode, the System may be configured to either use MCO tenant Day/Night modes
or system-wide Day/Night mode.
Operation
To switch Day/Day 2/Night modes using Feature Access Codes (CPC Ver. prior to 2.0):
Switch Mode
Toggle Day 1,
Day 2, and Night
Modes
Day 2 Mode
Night 1 Mode
576-50-700
TRS RING
Night Ring Pattern
(Same for Night 1,
and 2)
Night Ring Pattern
(Same for Night 1,
and 2)
Procedure
1. Press the ON/OFF key.
2. Enter 760.
3. Press the ON/OFF key
1. Press the ON/OFF key.
2. Enter 761 for the Day 2 Feature
code.
3. Press the ON/OFF key
1. Press the ON/OFF key.
2. Enter 762 for the Night 1 Feature
code.
3. Press the ON/OFF key
DBS 576 (USA) issued September 2001
Chapter 3. System Features
ATTENDANT
Night Attend. Group
(Same for Night 1,
and 2)
Night Attend. Group
(Same for Night 1,
and 2)
Indication
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
If changing to Night mode, Red LED lights
If changing to Day mode, Red LED goes off
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
Green LED lights
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
Red Night LED lights
BUILT-IN
VOICE
PROCESSING
UNIT
Night 1 Message
Night 2 Message
3-25