Selecting A Destination To Be Controlled (Single Destination Mode); Selecting A Source (Single Destination Mode) - GRASS VALLEY L-S series Instruction Manual

Section 6 — L-S Series Panel Operation

Selecting a Destination to be Controlled (Single Destination Mode)

Selecting a Source (Single Destination Mode)

112
Page Selection Method
1. Press and push the
Menu
window. The D1 window will display
windows will display a page of Destinations.
2. Use the arrow buttons to scroll through the available pages of
Up/Down
Destinations (For example,
appear in groups of 4, in yellow.
3. Select the desired Destination by pressing its adjacent soft button.
4. Press . The Destination window will display the name of the
Take
Destination now being controlled in yellow, and the panel returns to the
Single Destination mode, ready for Source selection. By default, the soft
buttons for all levels will illuminate.
Unless some buttons are toggled off, switching to a new Source will involve
all levels. (For information about breakaway switching, see
(LD4 Panel) on page
113.)
• If the Destination cannot be changed, it may be because the panel has
been limited to a certain Destination by the CP Output set used on the
MPK Devices table. See
Category Subset Method
1. Press . The D1 window will display
Dest
windows will display a page of Destinations.
2. Press a Category button (VTR, VCR, etc.). This will restrict the
Destinations displayed in the windows to that selected category. You
can scroll through multiple pages in a category, using the
buttons.
3. Select the desired Destination by pressing its adjacent soft button.
4. Press to select it as the active Destination and return to Single
Take
Destination mode.
Note If a Destination has been Protected or Locked by another panel, the Protect/
Lock button will illuminate steady amber (Protect) or red (Lock) and the Des-
tination will not be able to be switched. To continue, the Destination must be
unprotected or unlocked by the panel that protected or locked the Destination
(the name of that other panel will be displayed in the menu).
JUPITER L-S and LCD Series Control Panel Instruction Manual
soft button for the D3
Select Destination?
Destination?
in the D3 window). Destinations
Pg: 3/ 66
Section 4-Jupiter System
Destination?
and the other
Breakaways
Configuration.
and the other
arrow
Up/Down