Destination Button; Line # 1; Line #2; Line #3 - GRASS VALLEY L-S series Instruction Manual

Destination Button

Line # 1

Line #2

Line #3

JUPITER L-S and LCD Series Control Panel Instruction Manual
The following information is available for each Destination button.
Miscellaneous information will be shown on Line #1. This information can
be Page or Status information.
Page Numbers
The following information will only be displayed on Button #1 and will
time out after approximately 5 seconds.
Page numbers are displayed in the following format "p: xxx/yyy."
xxx = Current page number.
yyy = Total number of pages.
Locked Status
The following information will be displayed when the Destination is
locked. The display color will turn red and the Letter "L," followed by the
name of the panel that performed the lock, will be displayed.
Protected Status
The following information will be displayed when the Destination is pro-
tected. The display color will turn magenta and the Letter "P," followed by
the name of the panel that did the protecting, will be displayed.
Tie Line Status
The status of a Tie Line will be displayed by the letter "T" on line #1 of the
Destination that is using a tie line.
The Source in the Multiple-Destination Mode
The preset Source will be displayed on the top row, before the Take button
is selected in the Multiple-Destination mode.
The Source name that is currently being routed to the Destination will be
shown on line #2. The line will be blank if no Source is being routed.
The assigned Destination name is shown on line #3.
Standard Button Display
147