Ld4 - GRASS VALLEY L-S series Instruction Manual

Section 5 — Connecting the L-S, LCD Panel

LD4

86
Figure 51. L32 Connection Menu
- Connection -
C: Lan
N: Lan
6. Press the or the
UP
N: field to Serial.
The button will then turn green.
Take
7. Press the button to apply the change. You will then be given an
Take
option to change the Device ID.
8. Press the or the
UP
setting.
9. Press the button to apply the change.
Take
The Panel will then reboot and apply the changed settings.
Note Press the Clear button at any time to exit the menu without making changes
to the current settings.
Figure 52. LD4 Control Panel
Follow these steps to change the Connection Type setting using the LD4
panel's menu:
1. Press the button. The displayed items will change; look at the D1
Menu
Display window (the far-left display window).
2. Press the or the
UP
3. Press the button to select the Panel Setup? option
1
JUPITER L-S and LCD Series Control Panel Instruction Manual
Arrows to change the Connection type in the
Down
Arrows to scroll to the preferred Device ID
Down
Arrows to scroll to the Panel Setup? option.
Down
(Figure 53).