Level Mode - GRASS VALLEY L-S series Instruction Manual

Section 11 — LCD Series Panel Operation

Level Mode

170
7. Press the button to make the selection active. The button will now
TAKE
return to the original color and the switch will then occur.
The Level mode is designed to provide access to each level that is assigned
to a Destination, which makes breakaway switches easier to complete. Each
panel displays the available levels for a selected Destination. An individual
level may be locked or protected. You must be in the Main menu to see the
button. When the Level mode menu appears all levels will be off
Level Mode
and will be amber.
The ability to quickly select individual levels is offered in this mode using
the button. This feature is described below in the
Set All Levels
Levels On or OFF section.
The following figures show the Levels mode for the LCD16 and the LCD48
panel.
Figure 89. LCD16 -Level Mode
Level Buttons
Figure 90. LCD48 - Level Mode
Setting levels for a breakaway switch
Follow these steps to set levels for a breakaway switch:
1. Press the Scroll wheel to go to the Main menu.
2. Press the
Level Mode?
3. Select the preferred Destination. For steps to select a destination, see the
Select Destination Mode
JUPITER L-S and LCD Series Control Panel Instruction Manual
Level Buttons
button.
section. The selected output will be displayed.
Setting all
Command Buttons
Command Buttons