Table of Contents
Advertisement
Sticky Levels Mode (LD4 Panel)
LD4 Multiple Destination Mode
Entering Multiple Destination Mode
JUPITER L-S and LCD Series Control Panel Instruction Manual
5. The level windows will indicate status of the first 4 levels of the
switcher.
• If Sticky Levels is off, after the Take all levels will automatically be
deselected (their buttons will turn off). If Sticky Levels is on, only
the levels involved in the last Take will remain selected.
If Sticky Levels mode is ON, the level(s) involved in a breakaway Take
remain selected for subsequent Takes. To turn on Sticky Levels mode:
1. Press
. The display windows will display various modes.
Menu
2. Press the
arrow buttons to display
Up/Down
window and press its soft button.
3. The
menu will be displayed in the D1 window with its
Sticky Level
current status (ON or OFF).
4. Press
to toggle the state ON or OFF)
Take
The panel will exit Menu mode and operate with the new state.
Multiple Destination mode (sometimes referred to as "multi-bus" mode) is
in effect when various Destinations, in yellow, appear in the D1-D4 win-
dows; and level names ("video" etc.) do not appear.
This mode displays the top level (For example, video) status for 4 Destina-
tions. Additional pages of Destinations each can be accessed using the
arrow buttons. Multiple Destinations can be selected for single-Take
Down
switching.
1. Press
. The display windows will display various modes.
Menu
2. Press the
Multiple Destination?
display the page number for the display (For example,
windows' first line contains the status of 4 Destinations.
• If Destinations are undefined, the windows will show a series of
dashes. To define Destinations, see
Button Assignment on page
tion, for one of the D1-D4 windows, to use multiple Destination mode.
Panel Config?
soft button. The D1 window will then
Adding or Changing a Destination Soft
116. You must define at least one Destina-
LD4 Control Panel
in the D4
Up/
). The D1-D4
p00
115
Hide quick links:
Advertisement
Table of Contents
