Indicates item is selected.
Fig. 5-7: Example HDR Processing Parameter Controls (Example shown is for XIP Card)
3 Some card parameter control screens are further broken down into sub-screens which
are selectable with further navigation controls. This is shown for the XIP card example
in Figure 5-8.
Select a sub-screen.
Parameter Control sub-screen navigation controls
Fig. 5-8: Parameter Controls Screen Navigation Controls (Example shown is for XIP Card)
4 Adjust parameter values as required. (Refer to specific card documentation.)
Change Card Being Controlled
The user can change the card being controlled and remain on the same Parameter Control
screen on the RHS in order to quickly change parameters across different cards.
To change the card being controlled at any time:
1 Select another card in the Card List on the LHS of the Card Screen.
The 'Card being controlled' on the RHS changes to be the selected card, showing
parameters for the selected card on the RHS.
ATP-2000
User Guide
RHS
RHS
33