GRASS VALLEY L-S series Instruction Manual page 81

JUPITER L-S and LCD Series Control Panel Instruction Manual
3. Press the button.
Take
4. Press the or the
UP
option.
5. Press the button. The Connection menu will then appear
Take
(Figure 41).
Note The example in
replica of the displayed contents.
Figure 41. L64 Connection Menu
- Connection -
C: Lan
N: Lan
6. Press the or the
UP
N: field to Serial.
The button will then turn green.
Take
7. Press the button to apply the change. You will then be given an
Take
option to change the Device ID.
8. Press the or the
UP
setting.
9. Press the button to apply the change.
Take
The Panel will then reboot and apply the changed settings.
Note Press the Clear button at any time to exit the menu without making changes
to the current settings.
Changing the Connection Type Using the Panel's Menu
Arrows to scroll to the Connection Type?
Down
Figure 41 is for reference only, it is not meant to be an exact
Arrows to change the Connection type in the
Down
Arrows to scroll to the preferred Device ID
Down
81