Scenario 2 - X-Y Mode, Breakaway; Scenario 3 - Multi-Destination Mode, One Destination - GRASS VALLEY NV9000 User Manual

Press 'Destination Mode' to begin selection of a destination. Then press a category
button to choose a destination category. Then press additional category buttons to
append a suffix to the category mnemonic to generate the destination name.
The name you generate appears on the left (or top left) LCD button on the panel.
3 Select a source
Press 'Source Mode' to begin selection of a source. Then press a category button to
choose a source category. Then press additional category buttons to append a suffix to
the category mnemonic to generate the source name.
You can also press a dedicated source button if you have one for that source.
The selected LCD buttons turn yellow. The name of the source appears in the preset
line of those LCD buttons. All levels of the destination you chose are selected by
default.
4 Press a 'Take' button. You can press the take button under the destination button or
you can press the take button under any of the buttons for selected levels.
You could also press a 'Gang Take' button (among the function buttons) if you have
one.
Scenario 2 — X-Y Mode, Breakaway
1 (If required) switch to X-Y mode.
2 (If required) select a destination.
Press 'Destination Mode' to begin selection of a destination. Then press a category
button to choose a destination category. Then press additional category buttons to
append a suffix to the category mnemonic to generate the destination name.
The name you generate appears on the left (or top left) LCD button on the panel.
3 When you have selected a destination, its levels appear high-tally on the LCD buttons
used for levels. The level names are displayed on the bottom line of text on the buttons.
Initially all levels are selected (unless hold mode is on). Press one or more level buttons
to select and deselect levels until you have the selection you want.
4 Select a source
Press 'Source Mode' to begin selection of a source. Then press a category button to
choose a source category. Then press additional category buttons to append a suffix to
the category mnemonic to generate the source name.
You can also press a dedicated source button if you have one for that source.
The LCD buttons for preset source levels turn yellow. The name of the source appears in
the preset line of those LCD buttons.
5 Press a 'Take' button. You can press the take button under the destination button or
you can press the take button under any of the buttons for selected levels.
You could also press a 'Gang Take' button (among the function buttons) if you have
one.
Scenario 3 — Multi-Destination Mode, One Destination
1 (If required) switch to MD mode.
2 Select a destination.
(Optionally) scroll the MD pages to locate the destination of choice.
NV9608 and NV9616
User's Guide
35