Button Assignment; Undo (L64 Only) - GRASS VALLEY L-S series Instruction Manual

Button Assignment

Undo (L64 Only)

JUPITER L-S and LCD Series Control Panel Instruction Manual
Blue in the preset window), and pressing the Take button returns the Des-
tination to that previous Source.
1. Press the button, use the
Menu
and then press
Config?
2. Scroll to the Source Swap menu, which displays its current status (ON
or OFF).
3. Press to toggle the state ON or OFF and exit Menu mode.
Take
Panel buttons can be assigned different functions, to permit quick selection
of Destinations, Sources, levels, sequences, and overrides.
1. Press .
Menu
2. Use the arrow buttons to scroll to
Up/Down
3. Press .
Take
4. Scroll to
Assign Buttons?
5. The menu displays
wish to assign (Source, Destination, Level, Sequence, or Override) and
press .
Take
6. Use the arrow buttons to scroll through the list of available
Up/Down
items. When the correct item is displayed, press
7. Press the button on the front panel to be used for this item. That button
will illuminate in red and its number will appear in the menu.
8. Press . The menu will then show
Take
.
Take
9. The menu returns to
through Step 8 above for more panel button assignments.
10. When done, press
When Source Swap mode is OFF, the
Pressing presets the previous Source. Pressing
Undo
then route that previous Source to the Destination. By pressing
repeatedly you can swap back and forth between two Sources.
Take
arrow buttons to scroll to
Up/Down
Take.
and press .
Take
. Scroll to the button type you
Select Assignment Type
Save this Button Assignment?;
Select Assignment Type.
to escape assignment mode.
Clear
button lights after each Take.
Undo
L32/L64 Control Panels
PanelConfig?
.
Take
press
You can now repeat Step 6
at this time will
Take
Undo
Panel
and
109