Protecting Or Locking A Destination - GRASS VALLEY L-S series Instruction Manual

Protecting or Locking a Destination

JUPITER L-S and LCD Series Control Panel Instruction Manual
2. Press the soft button next to the desired button location. Use the
arrow buttons if necessary to scroll through the pages of button
locations.
3. Select the desired Destination by pressing a category (For example,
"VTR") and unit number combination. The name of the Destination,
and the category/number, will appear in the window.
4. Press . The Destination will appear in the selected location.
Take
5. To assign more Destinations, repeat
6. When finished, press
The window(s) just programmed will indicate the Destination name in
yellow and the current Source for that Destination in green.
1. Confirm that the desired Destination(s) are selected. In Single
Destination mode the Destination appears in the Destination window.
In Multiple Destination mode soft buttons for the selected Destinations
are illuminated on the Destination page displays.
Note Only multiple Destinations located on the same page can be protected or
locked simultaneously. To protect or lock multiple Destinations on different
pages, access each page individually to select the Destinations.
2. Choose whether to protect or lock the Destination(s):
• To protect, press
indicating a protect operation in progress.
• To lock, press
Protect/Lock
cating a lock operation in progress.
The button will illuminate green.
Take
3. Press to protect or lock the Destination(s). The
Take
will then blink, which indicates that panel has been protected or locked.
• If another panel selects this Destination for control, that panel's
button will illuminate steady amber or red. If the other
Protect/Lock
panel attempts to switch this Destination, a
displayed, along with the name of the protecting panel.
• On S25 and S50 panels that lack a
when the controlled Destination is protected the Source button will
illuminate amber, and when locked it will be red.
Step 2
and then to exit the mode.
Menu Clear
once. The button will illuminate amber,
Protect/Lock
twice. The button will illuminate red, indi-
Protect/Lock
LD4 Control Panel
Up/Down
through Step 4.
button
Protect/Lock
or indicator will be
P L
button and display,
117