S100 Control Panel; L64 Panel Similarities And Differences; Basic S100 Operation - GRASS VALLEY L-S series Instruction Manual

Section 6 — L-S Series Panel Operation

S100 Control Panel

L64 Panel Similarities and Differences

Basic S100 Operation

132
For a summary of S100 functions see
Figure 76. S100 Control Panel
The S100 panel layout and operating procedures are nearly identical to the
L64 panel.
Significant differences include:
• One hundred assignable buttons instead of 64.
• ,
Sequence (Salvo) Dest
menus used to select these items.
• button, also used to directly access button assignment
Assign & Select
menus.
• The button used to protect and lock Destinations is labeled
.
Lock/Protect
• The S100 panel does not have an
• Alternate Mode operation (unique to the S100 L-S panel).
• Multi Destination mode operation (unique to the S100 L-S panel).
Refer to the following L64 procedures, which also apply to the S100 panel.
The only differences for S100 operations involves accessing menus. If you
wish, you can use the S100 panel's
buttons instead of the L64 panel's
Select
• Show Button Assignment on page 101
• Clearing Panel Modes on page 102
Destination and Source Selection Methods on page 102
•
• Protecting a Destination on page 104
JUPITER L-S and LCD Series Control Panel Instruction Manual
page 36.
, and buttons, which give direct access to the
Source
button.
Undo
Sequence (Salvo)
Menu
Protect/
Lock
instead
Lock
, , , and
Dest Source Assign &
and arrow buttons.
Up/Down
Panel
ID