Protection - GRASS VALLEY L-S series Instruction Manual

Protection

JUPITER L-S and LCD Series Control Panel Instruction Manual
Figure 91. LCD16 -BPS Mode
Source Buttons
Figure 92. LCD48 - BPS Mode
4. Use the Scroll wheel to see the available Sources.
5. Select the Sources by pressing the preferred green Source button. The
Take request is then sent immediately to the host.
Protecting a Destination prevents that Destination from being switched by
other panels in the system. The protecting panel may still change the Des-
tination. The
Protect/Lock
will blink magenta if any selected Destination's level is protected by the
local panel. The button will illuminate solid magenta if protected by
another panel. The panel that owns the protect function will also be dis-
played on the destination button.
Protecting a Destination
To protect a Destination:
1. Select the Destination that you wish to Protect by pressing the button.
Note In the Multiple Destination mode, Destinations are locked or protected on a
per page basis.
2. Press the
Protect/Lock
button will then turn magenta.
Source Buttons
button on the panel that owns the protect function
button in the Command buttons section once, the
Basic Panel Operations
Destination Buttons
Destination Buttons
173