GRASS VALLEY L-S series Instruction Manual page 87

JUPITER L-S and LCD Series Control Panel Instruction Manual
Figure 53. LD4 Control Panel Menu
Display Windows
4. Press the or the
UP
option.
5. Press the button to select the Connection Type? option. The display
1
will then change (Figure
Note The example in
replica of the displayed contents.
Figure 54. LD4 Connection Menu
C: Lan
N: Lan
6. Press the or the
UP
N: field to Serial.
The button will then turn green
Take
7. Press the button to apply the change. You will then be given an
Take
option to change the Device ID.
8. Press the or the
UP
setting.
9. Press the button to apply the change.
Take
The Panel will then reboot and apply the changed settings.
Changing the Connection Type Using the Panel's Menu
Arrows to scroll to the Connection Type?
Down
54).
Figure 54 is for reference only, it is not meant to be an exact
- Connection -
Arrows to change the Connection type in the
Down
(Figure
Arrows to scroll to the preferred Device ID
Down
Menu Button Take Button
UP and Down Buttons
53).
87