Table of Contents
Advertisement
Section 6 — L-S Series Panel Operation
Selecting a Destination to be Controlled (Single Destination Mode)
Selecting a Source (Single Destination Mode)
120
Page Selection Method
1. Press
. The D1 window will display
Dest
windows will display a page of Destinations.
2. Use the
arrow buttons to scroll through the available pages of
Up/Down
Destinations (For example,
appear in groups of 16, in yellow.
3. Select the desired Destination by pressing its adjacent soft button.
4. Press
Take
. The D15 window will display the name of the Destination
now being controlled in yellow, and the panel returns to the Single
Destination mode, ready for Source selection. By default, the soft
buttons for all levels will illuminate.
Unless some buttons are toggled off, switching to a new Source will involve
all levels. (For information about breakaway switching, see Breakaway
page
121.)
• If the Destination cannot be changed, it may be because the panel has
been limited to a certain Destination by the CP Output set used on the
MPK Devices table. See Section 4-Jupiter System Configuration.
Category Subset Method
1. Press
. The D1 window will display
Dest
windows will display a page of Destinations.
2. Press a Category button (VTR, VCR, etc.). This will restrict the
Destinations displayed in the windows to that selected category. If
multiple pages in that category exist, you can scroll through them with
the
arrow buttons.
Up/Down
3. Select the desired Destination by pressing its adjacent soft button.
4. Press
to select it as the active Destination and return to Single
Take
Destination mode.
Note
If a Destination has been Protected or Locked by another panel, the Protect/
Lock button will illuminate steady amber (Protect) or red (Lock) and the Des-
tination will not be able to be switched. To continue, the Destination must be
unprotected or unlocked by the panel that set the protect or lock (the name
of that other panel will be displayed in the menu).
JUPITER L-S and LCD Series Control Panel Instruction Manual
Destination?
in the D3 window). Destinations
Pg: 3/ 66
Destination?
and the other
on
and the other
Advertisement
Table of Contents
