L32 - GRASS VALLEY L-S series Instruction Manual

L32

Destination/ Status
Display Window
JUPITER L-S and LCD Series Control Panel Instruction Manual
3. Press the
Serial Mode Accept
The Panel will then reboot and apply the changed settings.
Figure 49. L32 Control Panel
Follow these steps to change the Connection Type setting using the L32
panel's menu:
1. Press the button. The items will then change, look at the
Menu
Destination/ Status display window.
2. Press the or the
UP
(Figure 50).
The Take button in the lower Right-hand corner will turn green
(Figure 50).
Figure 50. L32 Control Panel Menu
3. Press the button.
Take
4. Press the or the
UP
option.
5. Press the button. The Connection menu will then appear
Take
(Figure 51).
Note The example in
replica of the displayed contents.
Changing the Connection Type Using the Panel's Menu
button.
Arrows to scroll to the Panel Setup? option
Down
UP or Down Buttons
Arrows to scroll to the Connection Type?
Down
Figure 51 is for reference only, it is not meant to be an exact
Destination
Preset
Status
Menu Button
Take Button
85