GRASS VALLEY L-S series Instruction Manual page 92

Section 5 — Connecting the L-S, LCD Panel
92
Follow these steps to change the Connection Type setting using the LCD16
panel's menu:
1. Press the Scroll wheel to access the Panels' Main menu.
2. Press the
Panel Setup?
the Scroll wheel. The Setup Menu will then appear.
3. Press the
Connection Type?
Figure 62 for the button order. The Connection menu will then appear
(Figure 63).
Note The example in
replica of the displayed contents.
Figure 63. LCD16 Connection Menu
Display Windows
Connection
C: Lan
N: Lan
4. Use the Scroll wheel to change the Connection type in the N: field to
Serial.
The
Connection
5. Press the
Connection
an option to change the Device ID.
6. Use the Scroll wheel to scroll to the preferred Device ID setting.
7. Press the
Connection
The
Connections
then appear, "Settings Updated -Standby-."The Panel will then reboot
and apply the changed settings.
JUPITER L-S and LCD Series Control Panel Instruction Manual
button. This button is the fifth button to the left of
button. This button is the #5 button. See
Figure 63 is for reference only, it is not meant to be an exact
Scroll Wheel
button will then turn green.
button to apply the change. You will then be given
button to apply the change.
button will then turn red and the following text will