Ld4 Control Panel; Ld4 Operating Modes; Ld4 Single Destination Mode; Entering Single Destination Mode - GRASS VALLEY L-S series Instruction Manual

LD4 Control Panel

LD4 Operating Modes

LD4 Single Destination Mode

Entering Single Destination Mode

JUPITER L-S and LCD Series Control Panel Instruction Manual
For a summary of LD4 functions see
Figure 69. LD4 Control Panel
The LD4 has two distinct operating modes, Single Destination and Mul-
tiple Destinations.
• When operated inthe Single Destination mode, one Destination is
selected for control and the display windows show the Source for each
defined level of that Destination (video, left audio, right audio, etc.).
Breakaway switching is supported.
• When operated in the Multiple Destination mode, the LD4 can be used
to control multiple Destinations, with the names of 4 of those Destina-
tions (and the primary Source for each) on display simultaneously.
Multiple Destinations can be switched to the same Source with a single
Take. Breakaway switching is not supported in this mode (except via
Overrides).
In single Destination mode, windows D1-D4 show the status for each level
of one selected Destination. The name of the currently controlled Destina-
tion is shown in the Destination window.
1. Press . The display windows will display various modes and the
Menu
associated active soft buttons will illuminate.
2. Press the D1 window
mode will be selected and the panel will exit the menu mode.
The active Destination is shown in the Destination window. The level
names appear, in amber, in the D1-D4 windows. If more than 4 levels exist,
pressing the arrow buttons will page through the additional levels.
Up/Down
The Status window will report
is currently selected.
page 33.
soft button. Single Destination
Single Destination?
, or the highest numbered level that
All Levels
LD4 Control Panel
111